If you have water stains across ceilings and walls, then most probably, your roof has leaks. Tracking the leak can be the trickiest process of roof waterproofing repair. If you have a roof leakage, contact repair shops in Singapore immediately. Over time, small leaks may lead to big problems – mould, rotted framing and sheathing, destroyed insulation and damaged ceilings. If this happens, expect a lot of expenses. So, while it’s still small, have a shop repair it or do these four ways.
If you discover roof or wall leakage, repair it ASAP. Look for the source of leaks first. You can find these from water stains on the ceiling or run down on walls. Look for any curled, cracked, or missing shingles (rectangular pieces of asphalt or other roofing material) on the roof. Leaks can come from any area where shingles are placed. You may also check the end caps or the tent-shaped shingles for leaks.
Curled-back shingles may be resecured by brushing coats of asphalt roofing cement. Apply a generous amount of cement to the shingles and press tightly. Waterproofing services in Singapore often do this during warm weather to help cement dry fast. Consider this factor when you’re DIY-ing.
For broken, rotten, or missing shingles, you may replace them with new ones. Look for shingles on roof waterproofing hardware shops in Singapore. To remove it, lift the edges, then remove nails using a pry bar.
For a full roof and wall leakage repair, reseal all joints in the chimneys and dormers with roofing cement. If it gets damaged again, apply fresh new coats with a putty knife.These are just some of the ways to repair leaks yourself. If you can’t find the source of the leaks, call in roof leakage repair contractors in Singapore. They can repair shingles, leaks, or replace them with new ones.
Have any roof or wall leakage that needs repair? Get in touch with the team from General Waterproofing & Service to learn more about their waterproofing and repair services in Singapore.